Controller Series Diesel Generator Set

ATS106

ATS CONTROL MODULE

POWER

AUTO

MANUAL

MAINS NORMAL

MAINS CLOSED

GENS NORMAL

GENS CLOSED

LIXISE    Model ATS106

Interface：USB

Details: The use of 32-bit ARM processor as the core, can accurately detect two one-way

Ac voltage, the occurrence of voltage anomalies (loss of power, over voltage, under voltage, over

Frequency, underfrequency) makes accurate judgment, and the ATS switching is controlled by the module delay processing.

Features: It has the ability to detect electrical anomalies and send a signal to start the generator set after delay

Features.

LXC701

LIXiSE

Runing

EmSlop AUTO START MOOULE

High Engine Temp

Low Of Pre

Over Speed

Charge Falure

Low Baltery

Over Crank

Common Alarm

Model LXC701

(701AS,701MS,702AS,702MS)

Interface: USB

Details: A compact self-starting module that can be selected by button on the panel

Select three working states, the states are manual, automatic, stop, can also be passed far

Start the engine by inputting the start signal at the boot port.

Features: Automatically shut down the engine in case of failure and indicate the cause of failure through the LED.

LXC706

Interface: USB

Details: You can manually start/stop the generator set, or you can open it remotely

The engine signal automatically starts/stops the generator set and can automatically turn off the ignition when a fault is detected

The oil relay stops at the same time and the electromagnet is electrically drawn.

Features: ultra-small size, suitable for small generator sets, especially suitable for small gasoline units

Intelligent control.

LXC3120

0.0 0.0 0.08

0.0KW 0.0kUar

0.000L 0.0kUA

DII.S Open Warning

(LXC3110,LXC3120)

Details: The LXC3 * * * series controller uses a 32-bit ARM processor to achieve intelligence

Energy generator control technology. It can be used for automatic control of single diesel generator set

And monitoring, the generator set automatic start up, stop, data detection, alarm protection

Protection function. The controller adopts a large dot matrix LCD screen, with Chinese, English and Spanish

A wide selection of languages including Russian and dental. Simple operation, compact structure, simple wiring,

High reliability, can be widely used in various types of generator sets.

Features: LXC3120 adds the mains power monitoring function (AMF). Small size, work

Can be complete, widely used.

LXC3920

LIXISE

Starts

0:00:00

0.0k H

Loss Of Speed Shut down

Interface: USB+RS232

Details: Using 32-bit ARM processor, the generator set can be automatically started and stopped

Machine, data measurement, alarm protection function, the controller adopts a large screen dot matrix LCD screen,

Simple operation and reliable operation.

Features: Added the mains power monitoring function (AMF).

SMART GENSET｜

(LXC6110N, LXC6120N)

Interface: Default USB+RS232, you can inform the manufacturer to change RS232 to RS485.

Details:

(1) Large screen (240 * 128) LCD display, can be viewed on one page

All data, avoid frequent page changes

(2) Multi-language selection, support Chinese, English, Russian, Spanish.

(3) The maintenance reminder function automatically accumulates the running time and reminds maintenance in time.

(4) 200 fault records, detailed records of 25 parameters at the moment of failure

The number is easy to analyze the cause of the fault.

(5) Real-time clock automatically runs training regularly, and 2 groups of training time can be programmed.

(6) Acquisition and display of mains overvoltage, undervoltage, overfrequency, underfrequency, lack of inverse

Phase sequence warning function.

(7) 2 different identity Level password login, plus one-time temporary password, safe and reliable.

Features: LXC6120N has AMF function, which automatically starts the generator when the mains fails.

number：LXC6110N ／ LXC6120N

SMART GENSET｜

(LXC6110CAN,LXC6120CAN)

Ac system: 1P2W / 2P3W / 3P3W / 3P4W

Interface: Default USB+RS232, you can inform the manufacturer to change RS232 to RS485.

Details: With all the functions of the LXC6120N controller, and in

Based on the LXC6120N, the j1939ECU features are added and compatible with EFI units. the

All parameters can be set from the controller panel or via the USB/RS232 interface

. Its compact structure, simple connection, high reliability, can be widely used

In various types of generator set automation systems, fire pumps and other fields.

Features: LXC6120CAN adds CAN interface and mains monitoring function (AMF).

LXC7220

(LXC7110,LXC7120,LXC7120C,

LXC7210,LXC7210C,LXC7920)

Interface: Default USB+RS232, you can inform the manufacturer to change RS232 to RS485.

Details: The use of 32-bit ARM microcontroller, high hardware integration, reliability

Further improvement. It has RS232 communication interface and can be realized by MODBUS protocol

“Three remote” function. All parameters can be adjusted from the controller front panel.

More programmable Settings have been added to the LXC6 * * * series.

Features: The LXC7220 adds mains monitoring (AMF).

LXC8320

Interface: Default USB+RS232, you can inform the manufacturer to change RS232 to RS485.

Details: The LXC8320 controller is used for automation and monitoring of a single diesel generator set

System, using 32-bit microprocessor technology,

Realize the generator set automatic start/stop, a variety of parameters precision measurement, alarm protection

And “three remote” function. The controller uses a large LCD screen

(240 * 128LCD) graphic display that displays almost all of the important items in one page

Parameters, save turning pages. It can be widely used in various types of generator set automation systems

It can also be used in the automatic control system of fire pump and air compressor.

Features: Added mains monitoring function (AMF), similar to the 7320 control function.

LXC9220

CiO

((LXC9210,LXC9310,LXC951)

Interface: Default USB+RS232, you can inform the manufacturer to change RS232 to RS485.

Details: The use of 32-bit microprocessor technology, to achieve the generator set automatic boot

/ Shutdown, precision measurement of multiple parameters, alarm protection and “three remote” function. in

The LXC7 * * * series adds more programmable configurations and is a high-end control

A surname Added mains monitoring (AMF), mains/generation automatic switching control function

It is not suitable for single-machine automation system composed of one mains and one unit.

Features: Added mains monitoring function (AMF), more programmable configuration.

SMART GENSET｜

（LBC6610B-4G,LXC6620B-4G)

Interface: RS485

LXC6620B-4G is a remote monitoring controller, that is, a cloud product.

It is a data acquisition device in one controller, using 4G / 2G connection

Connected cloud platform, remote monitoring, fault diagnosis, operation data recording, initial

Failure prevention, health inspection, etc., reduce the maintenance cost of users, improve the unit

Reliability. Wherever you are, as long as you have the Internet, you can use mobile phones or electricity

Brain remote monitoring of the operation data and status of the generator set, remote management of the generator set.

Features: SIM card can be installed directly, the network is 4G band. LXC6620B-4G added

Mains monitoring function (AMF).

Interface: RS485

Details: LXC6610WIFI/LXC6620WIFI is a remote monitoring controller, also known as Cloud products. It is a set of data acquisition device in one controller, it adopts wifi connection to the cloud platform, to achieve remote monitoring, fault diagnosis, running number

According to records, initial failure prevention, health check, etc., reduce the maintenance cost of users,

Improve the reliability of the unit. No matter where it is, as long as there is an Internet, it can be connected

Remote monitoring of the operation data and status of the generator set through mobile phones or computers, remote management

The generator set.

Features: LXC6620WIFI adds mains monitoring function (AMF).